Hanging display tray Box Template Generator

Hanging display tray. A shallow low-fronted tray with a tall back panel punched for a hook, so it hangs off a rail or a clip strip rather than sitting on a shelf.

Not yet plate-checked. This template folds, closes and exports cleanly, but its blank has not yet been matched against the standard's own drawing in detail. Treat it as a starting point and check it before you spend anything.

What is Hanging display tray?

Hanging display tray is a folding carton with a glued side seam, closing at each end with a tuck, a lock or a glued flap. A shallow low-fronted tray with a tall back panel punched for a hook, so it hangs off a rail or a clip strip rather than sitting on a shelf.

Uses

Retail and gift packaging, where the box is seen by the customer

Advantages

Cut from a single blank, so there is one tool and one part to stock

Disadvantages

No standard style suits every product; check the fit against a sample before committing to a tool

Typical industries

Retail display

Recommended board grades

Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.

At a glance

Code	`HANGTRAY`
Family	Display & POS
Also known as	hanging display tray, clip strip tray
Blank size at this size	369 × 364 mm
Panels	10
Creases	9

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open HANGTRAY in the generator

Other codes in this group

Browse every code, or read what the groups mean.

Every FEFCO code we build — all 244 of them, grouped.
FEFCO codes explained — what the four digits mean and what each group covers.
How to measure a box — inside, outside and crease-to-crease.
Flutes and calipers — why board thickness changes the blank.