Shoulder box inner tray Box Template Generator

Shoulder box inner tray. The inner tray of a shoulder-neck box, sized to sit inside the base with the neck standing proud so the lid seats on it. Pair with a base one caliper larger.

Not yet plate-checked. This template folds, closes and exports cleanly, but its blank has not yet been matched against the standard's own drawing in detail. Treat it as a starting point and check it before you spend anything.

What is Shoulder box inner tray?

Shoulder box inner tray is a folding carton with a glued side seam, closing at each end with a tuck, a lock or a glued flap. The inner tray of a shoulder-neck box, sized to sit inside the base with the neck standing proud so the lid seats on it. Pair with a base one caliper larger.

Uses

General packing where a simple, economical board box is wanted

Advantages

Cut from a single blank, so there is one tool and one part to stock

Disadvantages

No standard style suits every product; check the fit against a sample before committing to a tool

Typical industries

General packing and light manufacturing

Recommended board grades

Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.

At a glance

Code	`SHOULDER`
Family	Rigid box
Also known as	shoulder neck box, neck box inner
Blank size at this size	309 × 249 mm
Panels	9
Creases	8

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open SHOULDER in the generator

Other codes in this group

Browse every code, or read what the groups mean.

Every FEFCO code we build — all 244 of them, grouped.
FEFCO codes explained — what the four digits mean and what each group covers.
How to measure a box — inside, outside and crease-to-crease.
Flutes and calipers — why board thickness changes the blank.