FEFCO 0610 Box Template Generator

Rigid box, plain body with square-cornered ends. The wall-base-wall-lid body with end panels whose four flanges are cut square out at the corners rather than relieved, so each flange folds independently.

Checked against the plate. This blank has been compared side by side with the drawing in the FEFCO Code, 12th Edition, and matches. That is a statement about the drawing, not a guarantee — always cut and fold a sample before committing to a die.

What is FEFCO 0610?

FEFCO 0610 is assembled from more than one part and delivered made-up rather than flat, so they hold their shape before being filled. The wall-base-wall-lid body with end panels whose four flanges are cut square out at the corners rather than relieved, so each flange folds independently.

Uses

Jobs where the depth or the fit has to be adjusted after packing

Advantages

A standard construction, so most converters can quote it from the code alone

Disadvantages

Needs 3 separate pieces, so there is more than one tool and more than one part to handle
Delivered made-up rather than flat, so it costs more to store and to ship empty

Typical industries

General packing and light manufacturing

Recommended board grades

Single wall B or E flute, frequently lined or wrapped. These are set-up boxes, so board stiffness matters more than crush resistance.

At a glance

Code	`0610`
Family	Corrugated (FEFCO)
Blank size at this size	875 × 636 mm
Panels	15
Creases	12

Measured against p84 with scripts/plate-diff.py: score 0.981, MATCH, cut 1.000 found / 1.000 extra, crease 1.000 / 1.000. It carries no plate badge all the same, and that is deliberate. This blank shares a fold topology with five others in group 06, and scored against each of their plates through scripts/settle-shared.py it reaches 0.986 on 0616 — higher than the 0.981 it reaches on its own. A fit that solves for proportions cannot tell two same-topology plates apart, so a match here rules other readings out rather than ruling this one in, and a badge would be claiming more than the measurement supports. The drawing itself is not in question: every stroke agrees with p84 in both directions.

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open 0610 in the generator

Other rigid boxes

Two separate end pieces and a body, requiring stitching or a similar operation before use.

Browse every code, or read what the groups mean.

Every FEFCO code we build — all 244 of them, grouped.
FEFCO codes explained — what the four digits mean and what each group covers.
How to measure a box — inside, outside and crease-to-crease.
Flutes and calipers — why board thickness changes the blank.