FEFCO 0505 Box Template Generator

Slide box, two crossing sleeves. The same matchbox principle built from the other pair of components, giving a different grain direction and a different open face. Choose whichever leaves your print on the outside.

Checked against the plate. This blank has been compared side by side with the drawing in the FEFCO Code, 12th Edition, and matches. That is a statement about the drawing, not a guarantee — always cut and fold a sample before committing to a die.

What is FEFCO 0505?

FEFCO 0505 is made from more than one piece, with an inner tray or frame sliding inside an outer sleeve. The same matchbox principle built from the other pair of components, giving a different grain direction and a different open face. Choose whichever leaves your print on the outside.

Uses

Retail and gift packaging, where the box is seen by the customer
Jobs where the depth or the fit has to be adjusted after packing

Advantages

The two parts can be made from different boards, or printed differently

Disadvantages

Needs 2 separate pieces, so there is more than one tool and more than one part to handle

Typical industries

General packing and light manufacturing

Recommended board grades

Single wall E or B flute, or solid board for the smaller sizes. Both pieces are usually the same board so the slide fit stays predictable.

At a glance

Code	`0505`
Family	Corrugated (FEFCO)
Blank size at this size	870 × 526 mm
Panels	10
Creases	8

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open 0505 in the generator