FEFCO 0512 Box Template Generator

Slide box, flanged wrap over an open channel. Two open channels rather than two tubes: an outer wrap round three sides with a turned flange along every top and bottom edge, and an inner channel closing the top, bottom and one end. Neither piece is glued — each holds the other shut.

Checked against the plate. This blank has been compared side by side with the drawing in the FEFCO Code, 12th Edition, and matches. That is a statement about the drawing, not a guarantee — always cut and fold a sample before committing to a die.

What is FEFCO 0512?

FEFCO 0512 is made from more than one piece, with an inner tray or frame sliding inside an outer sleeve. Two open channels rather than two tubes: an outer wrap round three sides with a turned flange along every top and bottom edge, and an inner channel closing the top, bottom and one end. Neither piece is glued — each holds the other shut.

Uses

Jobs where the depth or the fit has to be adjusted after packing
High-volume packing lines, since a pre-glued blank erects in one movement

Advantages

Arrives glued and flat, and erects quickly by hand or by machine
The two parts can be made from different boards, or printed differently

Disadvantages

Needs 2 separate pieces, so there is more than one tool and more than one part to handle
The glued joint sets the minimum order — short runs are rarely economical

Typical industries

General packing and light manufacturing

Recommended board grades

Single wall E or B flute, or solid board for the smaller sizes. Both pieces are usually the same board so the slide fit stays predictable.

At a glance

Code	`0512`
Family	Corrugated (FEFCO)
Blank size at this size	790 × 478 mm
Panels	16
Creases	14

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open 0512 in the generator