FEFCO 0507 Box Template Generator
Slide box, side sleeve over end sleeve (short). An outer sleeve around the sides with a short end sleeve inside it. Uses less board than the other slide boxes because the inner tube only has to close the ends.
Not yet plate-checked. This template folds, closes and exports cleanly, but its blank has not yet been matched against the standard's own drawing in detail. Treat it as a starting point and check it before you spend anything.
What is FEFCO 0507?
FEFCO 0507 is made from more than one piece, with an inner tray or frame sliding inside an outer sleeve. An outer sleeve around the sides with a short end sleeve inside it. Uses less board than the other slide boxes because the inner tube only has to close the ends.
Uses
- Jobs where the depth or the fit has to be adjusted after packing
Advantages
- The two parts can be made from different boards, or printed differently
Disadvantages
- Needs 2 separate pieces, so there is more than one tool and more than one part to handle
Typical industries
- General packing and light manufacturing
Recommended board grades
Single wall E or B flute, or solid board for the smaller sizes. Both pieces are usually the same board so the slide fit stays predictable.
At a glance
| Code | 0507 |
| Family | Corrugated (FEFCO) |
| Blank size at this size | 1070 × 426 mm |
| Panels | 10 |
| Creases | 8 |
No plate badge, and the reason is measured rather than doubted. This blank shares a fold topology with its siblings in its group, and scored against each of their plates through scripts/settle-shared.py it reaches 1.000 on a rival against 0.997 on its own. A fit that solves for proportions cannot tell two same-topology plates apart, so a match here rules other readings OUT rather than ruling this one in — see the docstring in scripts/grant-badges.py. Rival scores: 0510 1.000, 0504 0.500, 0505 0.500, 0509 0.500. The drawing itself is not in question; only the claim that it was checked against THIS plate rather than a sibling.
Get the dieline
The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.
Open 0507 in the generatorOther slide boxes
Several pieces that slide into one another in opposite directions — sleeves and inner frames.
- 0501Sleeve around the sides
- 0502Sleeve around top, bottom and ends
- 0503Sleeve around the ends
- 0504Slide box, side sleeve over end sleevechecked
- 0505Slide box, two crossing sleeveschecked
- 0509End sleeve over a butt-seam linerchecked
- 0510Slide box, end sleeve over side sleeve
- 0511Flanged wrap over an end sleevechecked
- 0512Slide box, flanged wrap over an open channelchecked
Browse every code, or read what the groups mean.
Related
- Every FEFCO code we build — all 244 of them, grouped.
- FEFCO codes explained — what the four digits mean and what each group covers.
- How to measure a box — inside, outside and crease-to-crease.
- Flutes and calipers — why board thickness changes the blank.