Box BlanksParametric packaging dielines

FEFCO 0321 Box Template Generator

Twin telescoping slotted bodies with locks. Two slotted wraps telescoping together. The closing flaps run past the centreline: one long flap is notched back to the centre, the opposite one is a trapezoid whose tip drops into that notch, and the two short flaps are mitred so they pass underneath. The pair holds itself closed at both ends without tape.

Not yet plate-checked. This template folds, closes and exports cleanly, but its blank has not yet been matched against the standard's own drawing in detail. Treat it as a starting point and check it before you spend anything.

0321 Twin telescoping slotted bodies with locksGenerated by Box Blanks — boxblanks.com Box Blanks · boxblanks.com

What is FEFCO 0321?

FEFCO 0321 is built from two or more pieces, most often a separate lid over a body, so the depth can vary with what is packed. Two slotted wraps telescoping together. The closing flaps run past the centreline: one long flap is notched back to the centre, the opposite one is a trapezoid whose tip drops into that notch, and the two short flaps are mitred so they pass underneath. The pair holds itself closed at both ends without tape.

Uses

Advantages

Disadvantages

Typical industries

Recommended board grades

Single wall B or C flute is usual. The lid and body are often the same board; a heavier body under a lighter lid is worth considering where only the body carries the stack.

At a glance

Code0321
FamilyCorrugated (FEFCO)
Blank size at this size1074 × 857 mm
Panels18
Creases16

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open 0321 in the generator

Other telescopic boxes

More than one piece, characterised by a lid and/or bottom that telescope over the body.

Browse every code, or read what the groups mean.

Related