FEFCO 0323 Box Template Generator

Telescope box, tapered with deep lid. The nesting tapered pair with the lid taken most of the way down, so the finished box reads as one piece while still stacking empty.

Not yet plate-checked. This template folds, closes and exports cleanly, but its blank has not yet been matched against the standard's own drawing in detail. Treat it as a starting point and check it before you spend anything.

What is FEFCO 0323?

FEFCO 0323 is built from two or more pieces, most often a separate lid over a body, so the depth can vary with what is packed. The nesting tapered pair with the lid taken most of the way down, so the finished box reads as one piece while still stacking empty.

Uses

Jobs where the depth or the fit has to be adjusted after packing

Advantages

The two parts can be made from different boards, or printed differently

Disadvantages

Needs 2 separate pieces, so there is more than one tool and more than one part to handle

Typical industries

General packing and light manufacturing

Recommended board grades

Single wall B or C flute is usual. The lid and body are often the same board; a heavier body under a lighter lid is worth considering where only the body carries the stack.

At a glance

Code	`0323`
Family	Corrugated (FEFCO)
Blank size at this size	419 × 700 mm
Panels	10
Creases	8

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open 0323 in the generator

Other telescopic boxes

More than one piece, characterised by a lid and/or bottom that telescope over the body.

Browse every code, or read what the groups mean.

Every FEFCO code we build — all 244 of them, grouped.
FEFCO codes explained — what the four digits mean and what each group covers.
How to measure a box — inside, outside and crease-to-crease.
Flutes and calipers — why board thickness changes the blank.