Top-load locking tray Box Template Generator
Top-load locking tray. The bare tray of the Kliklok skillet: four walls with an arrow-headed lock at each corner that engages a slit in the neighbouring wall as the walls are pushed up. It erects in one downward motion on a top-load line, with no glue and no closing step.
Not yet plate-checked. This template folds, closes and exports cleanly, but its blank has not yet been matched against the standard's own drawing in detail. Treat it as a starting point and check it before you spend anything.
What is Top-load locking tray?
Top-load locking tray is a folding carton with a glued side seam, closing at each end with a tuck, a lock or a glued flap. The bare tray of the Kliklok skillet: four walls with an arrow-headed lock at each corner that engages a slit in the neighbouring wall as the walls are pushed up. It erects in one downward motion on a top-load line, with no glue and no closing step.
Uses
- Retail and gift packaging, where the box is seen by the customer
- High-volume packing lines, since a pre-glued blank erects in one movement
Advantages
- Cut from a single blank, so there is one tool and one part to stock
- Arrives glued and flat, and erects quickly by hand or by machine
Disadvantages
- The glued joint sets the minimum order — short runs are rarely economical
Typical industries
- General packing and light manufacturing
Recommended board grades
Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.
At a glance
| Code | B15.06.00.00 |
| Family | Folding carton (ECMA) |
| Also known as | kliklok top load tray, Kliklok FC0500 skillet |
| Blank size at this size | 364 × 236 mm |
| Panels | 9 |
| Creases | 8 |
Measured 0.847 against the p37 plate (a CHECK, not a match): the corner lock is a curved arrow head on the plate and a straight nib here.
Get the dieline
The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.
Open B15.06.00.00 in the generatorOther codes in this group
- RTEReverse Tuck End (RTE)checked
- STEStraight Tuck End (STE)checked
- AUTOAuto-bottom (crash lock) carton
- SLEEVESleeve (open both ends)
- PILLOWPillow box
- TTSBTuck Top, Seal End Bottom
- SNAPSnap-lock bottom (1-2-3 bottom)
- SEALSeal End carton
- GABLEGable top carton
- AUTO-FAuto-bottom, tuck to frontchecked
- SKILLET-TTSkillet base, tuck topchecked
- RTE-INVInverted Reverse Tuck Endchecked
- B4050Four-corner tray with hinged lid
- SNAP-FSnap-lock bottom, tuck to frontchecked
- HEXHexagonal carton
- STE-FSame panel tuck, to frontchecked
- B1010Self-locking traychecked
- TTSB-FTuck Top (front), Seal End Bottom
- AUTO-SEALCrash lock base, sealed top
- B6121Four-corner hinged lid tray, webbed
- WEBTUCKWebbed tuck carton
- TAPERTapered display tray
- B4020In-fold tray, four corners gluedchecked
- WRAPNon-glued wrap
Browse every code, or read what the groups mean.
Related
- Every FEFCO code we build — all 244 of them, grouped.
- FEFCO codes explained — what the four digits mean and what each group covers.
- How to measure a box — inside, outside and crease-to-crease.
- Flutes and calipers — why board thickness changes the blank.