Skillet base, tuck top Box Template Generator
Skillet base, tuck top. A glued four-flap base with a reclosable tuck top. Fast and tamper-evident underneath, opens and shuts by hand on top — the everyday compromise for boxed retail goods.
Checked against the plate. This blank has been compared side by side with the drawing in the FEFCO Code, 12th Edition, and matches. That is a statement about the drawing, not a guarantee — always cut and fold a sample before committing to a die.
What is Skillet base, tuck top?
Skillet base, tuck top is a folding carton with a glued side seam, closing at each end with a tuck, a lock or a glued flap. A glued four-flap base with a reclosable tuck top. Fast and tamper-evident underneath, opens and shuts by hand on top — the everyday compromise for boxed retail goods.
Uses
- Retail and gift packaging, where the box is seen by the customer
- High-volume packing lines, since a pre-glued blank erects in one movement
Advantages
- Cut from a single blank, so there is one tool and one part to stock
- Arrives glued and flat, and erects quickly by hand or by machine
Disadvantages
- The glued joint sets the minimum order — short runs are rarely economical
Typical industries
- General packing and light manufacturing
Recommended board grades
Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.
At a glance
| Code | SKILLET-TT |
| Family | Folding carton (ECMA) |
| Also known as | A10.20.03.03, tuck to back standard skillet |
| Blank size at this size | 294 × 287 mm |
| Panels | 13 |
| Creases | 12 |
ECMA 2022 code newly claimed. The p.21 plate glues the base with the plain "10" band and hangs a tuck lid over the third panel from the glue seam at the top, dust flap either side — 10 for the base, 20 for the top, and 03 for the panel both are counted from.
Get the dieline
The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.
Open SKILLET-TT in the generatorOther codes in this group
- RTEReverse Tuck End (RTE)checked
- STEStraight Tuck End (STE)checked
- AUTOAuto-bottom (crash lock) carton
- SLEEVESleeve (open both ends)
- PILLOWPillow box
- TTSBTuck Top, Seal End Bottom
- SNAPSnap-lock bottom (1-2-3 bottom)
- SEALSeal End carton
- GABLEGable top carton
- AUTO-FAuto-bottom, tuck to frontchecked
- RTE-INVInverted Reverse Tuck Endchecked
- B4050Four-corner tray with hinged lid
- SNAP-FSnap-lock bottom, tuck to frontchecked
- HEXHexagonal carton
- STE-FSame panel tuck, to frontchecked
- B1010Self-locking traychecked
- TTSB-FTuck Top (front), Seal End Bottom
- AUTO-SEALCrash lock base, sealed top
- B6121Four-corner hinged lid tray, webbed
- WEBTUCKWebbed tuck carton
- TAPERTapered display tray
- B4020In-fold tray, four corners gluedchecked
- WRAPNon-glued wrap
- SNAP-OPENSnap lock base, open topchecked
Browse every code, or read what the groups mean.
Related
- Every FEFCO code we build — all 244 of them, grouped.
- FEFCO codes explained — what the four digits mean and what each group covers.
- How to measure a box — inside, outside and crease-to-crease.
- Flutes and calipers — why board thickness changes the blank.