Sleeve (open both ends) Box Template Generator

Sleeve (open both ends). A plain glued tube with no closures — slides over a tray, a bottle or another box. The cheapest possible printed carton and the easiest to assemble.

Not yet plate-checked. This template folds, closes and exports cleanly, but its blank has not yet been matched against the standard's own drawing in detail. Treat it as a starting point and check it before you spend anything.

What is Sleeve (open both ends)?

Sleeve (open both ends) is a folding carton with a glued side seam, closing at each end with a tuck, a lock or a glued flap. A plain glued tube with no closures — slides over a tray, a bottle or another box. The cheapest possible printed carton and the easiest to assemble.

Uses

Retail and gift packaging, where the box is seen by the customer
High-volume packing lines, since a pre-glued blank erects in one movement

Advantages

Cut from a single blank, so there is one tool and one part to stock
Arrives glued and flat, and erects quickly by hand or by machine

Disadvantages

The glued joint sets the minimum order — short runs are rarely economical

Typical industries

General packing and light manufacturing

Recommended board grades

Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.

At a glance

Code	`SLEEVE`
Family	Folding carton (ECMA)
Also known as	sleeve, tube
Blank size at this size	284 × 120 mm
Panels	5
Creases	4

No ECMA code claimed here. A01.01.00.00 was, and the plate on p.19 does draw this construction — but it is one plate, and TUBE already carries it. Two codes cannot both be the published drawing of A01.01.00.00, and scoring them both against it says nothing: they came out at the same 0.761 because they are the same blank under two trade names. The dotted code stays on TUBE, whose own listed name (open ended top and base) is the one the book prints for it; SLEEVE keeps the search terms and no standards claim.

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open SLEEVE in the generator

Other codes in this group

Browse every code, or read what the groups mean.

Every FEFCO code we build — all 244 of them, grouped.
FEFCO codes explained — what the four digits mean and what each group covers.
How to measure a box — inside, outside and crease-to-crease.
Flutes and calipers — why board thickness changes the blank.