Turn-over end tray Box Template Generator

Turn-over end tray. The end walls fold up and then over on themselves, so the top edge is a smooth double fold rather than a raw cut. Neater in the hand and stiffer where the tray is picked up.

Not yet plate-checked. This template folds, closes and exports cleanly, but its blank has not yet been matched against the standard's own drawing in detail. Treat it as a starting point and check it before you spend anything.

What is Turn-over end tray?

Turn-over end tray is a folding carton with a glued side seam, closing at each end with a tuck, a lock or a glued flap. The end walls fold up and then over on themselves, so the top edge is a smooth double fold rather than a raw cut. Neater in the hand and stiffer where the tray is picked up.

Uses

Retail and gift packaging, where the box is seen by the customer

Advantages

Cut from a single blank, so there is one tool and one part to stock

Disadvantages

No standard style suits every product; check the fit against a sample before committing to a tool

Typical industries

General packing and light manufacturing

Recommended board grades

Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.

At a glance

Code	`B2110`
Family	Folding carton (ECMA)
Also known as	turn over end tray
Blank size at this size	320 × 331 mm
Panels	11
Creases	10

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open B2110 in the generator

Other codes in this group

Browse every code, or read what the groups mean.

Every FEFCO code we build — all 244 of them, grouped.
FEFCO codes explained — what the four digits mean and what each group covers.
How to measure a box — inside, outside and crease-to-crease.
Flutes and calipers — why board thickness changes the blank.