Webbed self-locking tray, relieved tucks Box Template Generator

Webbed self-locking tray, relieved tucks. The webbed returned-wall tray with its tuck tabs cut well back at the corners, so the tabs clear the returns as the tray is erected by hand. Same box as the plain-tucked version, easier to close.

Not yet plate-checked. This template folds, closes and exports cleanly, but its blank has not yet been matched against the standard's own drawing in detail. Treat it as a starting point and check it before you spend anything.

What is Webbed self-locking tray, relieved tucks?

Webbed self-locking tray, relieved tucks is a folding carton with a glued side seam, closing at each end with a tuck, a lock or a glued flap. The webbed returned-wall tray with its tuck tabs cut well back at the corners, so the tabs clear the returns as the tray is erected by hand. Same box as the plain-tucked version, easier to close.

Uses

Retail and gift packaging, where the box is seen by the customer

Advantages

Cut from a single blank, so there is one tool and one part to stock
Locks closed without glue or tape, which saves a consumable and a step

Disadvantages

Hand-locking takes longer per box than a taped or glued closure

Typical industries

General packing and light manufacturing

Recommended board grades

Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.

At a glance

Code	`B30.04.00.00`
Family	Folding carton (ECMA)
Also known as	webbed self locking tray, wide relief
Blank size at this size	620 × 471 mm
Panels	17
Creases	20

No plate badge, and the reason is measured rather than doubted. This blank shares a fold topology with its siblings in its group, and scored against each of their plates through scripts/settle-shared.py it reaches 0.963 on a rival against 0.963 on its own. A fit that solves for proportions cannot tell two same-topology plates apart, so a match here rules other readings OUT rather than ruling this one in — see the docstring in scripts/grant-badges.py. Rival scores: B48.21.00.00 0.963, B10.04.00.00 0.884. The drawing itself is not in question; only the claim that it was checked against THIS plate rather than a sibling.

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open B30.04.00.00 in the generator

Other codes in this group

Browse every code, or read what the groups mean.

Every FEFCO code we build — all 244 of them, grouped.
FEFCO codes explained — what the four digits mean and what each group covers.
How to measure a box — inside, outside and crease-to-crease.
Flutes and calipers — why board thickness changes the blank.