Turn-over end tray, square corner laps Box Template Generator

Turn-over end tray, square corner laps. The short walls fold up and then back on themselves so the top edge is a smooth double fold, and each corner is closed by a plain square lap glued to the wall it folds against. The turn-over edge without the locking tabs, so it runs on a gluer rather than by hand.

Checked against the plate. This blank has been compared side by side with the drawing in the FEFCO Code, 12th Edition, and matches. That is a statement about the drawing, not a guarantee — always cut and fold a sample before committing to a die.

What is Turn-over end tray, square corner laps?

Turn-over end tray, square corner laps is a folding carton with a glued side seam, closing at each end with a tuck, a lock or a glued flap. The short walls fold up and then back on themselves so the top edge is a smooth double fold, and each corner is closed by a plain square lap glued to the wall it folds against. The turn-over edge without the locking tabs, so it runs on a gluer rather than by hand.

Uses

Retail and gift packaging, where the box is seen by the customer
High-volume packing lines, since a pre-glued blank erects in one movement

Advantages

Cut from a single blank, so there is one tool and one part to stock
Arrives glued and flat, and erects quickly by hand or by machine

Disadvantages

The glued joint sets the minimum order — short runs are rarely economical

Typical industries

General packing and light manufacturing

Recommended board grades

Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.

At a glance

Code	`B44.20.00.00`
Family	Folding carton (ECMA)
Also known as	turn over end tray, glued corner laps
Blank size at this size	461 × 241 mm
Panels	11
Creases	10

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open B44.20.00.00 in the generator

Other codes in this group

Browse every code, or read what the groups mean.

Every FEFCO code we build — all 244 of them, grouped.
FEFCO codes explained — what the four digits mean and what each group covers.
How to measure a box — inside, outside and crease-to-crease.
Flutes and calipers — why board thickness changes the blank.