Tapered tray with hinged cover Box Template Generator
Tapered tray with hinged cover. The tapered tray with a full cover hinged off one side wall and a thumb notch to open it. The corners close with tabs and the far wall carries a closing panel, so the whole thing erects and shuts without a separate lid.
Checked against the plate. This blank has been compared side by side with the drawing in the FEFCO Code, 12th Edition, and matches. That is a statement about the drawing, not a guarantee — always cut and fold a sample before committing to a die.
What is Tapered tray with hinged cover?
Tapered tray with hinged cover is a folding carton of a special construction. The tapered tray with a full cover hinged off one side wall and a thumb notch to open it. The corners close with tabs and the far wall carries a closing panel, so the whole thing erects and shuts without a separate lid.
Uses
- General packing where a simple, economical board box is wanted
Advantages
- Cut from a single blank, so there is one tool and one part to stock
Disadvantages
- No standard style suits every product; check the fit against a sample before committing to a tool
Typical industries
- General packing and light manufacturing
Recommended board grades
Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.
At a glance
| Code | D20.20.20.50 |
| Family | Folding carton (ECMA) |
| Also known as | D20.20.20.50, tapered tray with cover, hinged cover tray |
| Blank size at this size | 125 × 130 mm |
| Panels | 13 |
| Creases | 12 |
Scored against the ECMA 2022 plate on page 55 with scripts/plate-diff.py: 1.000, MATCH (cut 1.000/1.000, crease 1.000/1.000). Every dimension is set out in the note on the D20.20.20.50 constants above, measured off that plate.
Get the dieline
The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.
Open D20.20.20.50 in the generatorOther codes in this group
- RTEReverse Tuck End (RTE)checked
- STEStraight Tuck End (STE)checked
- AUTOAuto-bottom (crash lock) carton
- SLEEVESleeve (open both ends)
- PILLOWPillow box
- TTSBTuck Top, Seal End Bottom
- SNAPSnap-lock bottom (1-2-3 bottom)
- SEALSeal End carton
- GABLEGable top carton
- AUTO-FAuto-bottom, tuck to frontchecked
- SKILLET-TTSkillet base, tuck topchecked
- RTE-INVInverted Reverse Tuck Endchecked
- B4050Four-corner tray with hinged lid
- SNAP-FSnap-lock bottom, tuck to frontchecked
- HEXHexagonal carton
- STE-FSame panel tuck, to frontchecked
- B1010Self-locking traychecked
- TTSB-FTuck Top (front), Seal End Bottom
- AUTO-SEALCrash lock base, sealed top
- B6121Four-corner hinged lid tray, webbed
- WEBTUCKWebbed tuck carton
- TAPERTapered display tray
- B4020In-fold tray, four corners gluedchecked
- WRAPNon-glued wrap
Browse every code, or read what the groups mean.
Related
- Every FEFCO code we build — all 244 of them, grouped.
- FEFCO codes explained — what the four digits mean and what each group covers.
- How to measure a box — inside, outside and crease-to-crease.
- Flutes and calipers — why board thickness changes the blank.