Edge lock skillet, full crash lock base Box Template Generator

Edge lock skillet, full crash lock base. Four square glued flaps closing the top over a fully doubled crash-lock base — flat across the whole top end and two boards thick underneath.

Checked against the plate. This blank has been compared side by side with the drawing in the FEFCO Code, 12th Edition, and matches. That is a statement about the drawing, not a guarantee — always cut and fold a sample before committing to a die.

What is Edge lock skillet, full crash lock base?

Edge lock skillet, full crash lock base is a folding carton with a glued side seam, closing at each end with a tuck, a lock or a glued flap. Four square glued flaps closing the top over a fully doubled crash-lock base — flat across the whole top end and two boards thick underneath.

Uses

High-volume packing lines, since a pre-glued blank erects in one movement

Advantages

Cut from a single blank, so there is one tool and one part to stock
Arrives glued and flat, and erects quickly by hand or by machine

Disadvantages

The glued joint sets the minimum order — short runs are rarely economical

Typical industries

General packing and light manufacturing

Recommended board grades

Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.

At a glance

Code	`EDGELOCK-FULL`
Family	Folding carton (ECMA)
Also known as	A61.10.01.03, edge lock skillet, full crash lock base
Blank size at this size	294 × 271 mm
Panels	13
Creases	12

ECMA 2022 code newly claimed. The p.30 plate closes the top with the plain "10" band — four square flaps each the carton's own depth — over the full crash lock base, and 10/61 in the code says exactly that. The base was a separate question and was NOT claimed to match: p.30 takes one base panel the full depth and leaves the other three at half of it, and that is what fullLockBottom now draws, taking the whole blank from 0.857 to 0.928. The bare "lock" line this template used to draw on the wall is on no plate and has been removed.

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open EDGELOCK-FULL in the generator

Other codes in this group

Browse every code, or read what the groups mean.

Every FEFCO code we build — all 244 of them, grouped.
FEFCO codes explained — what the four digits mean and what each group covers.
How to measure a box — inside, outside and crease-to-crease.
Flutes and calipers — why board thickness changes the blank.