Two-cell tube with integral partition Box Template Generator

Two-cell tube with integral partition. An open-ended sleeve divided into two equal cells by a partition folded from the same blank. The partition carries the glue lap, so the tube and the divider are made in one gluing operation.

Checked against the plate. This blank has been compared side by side with the drawing in the FEFCO Code, 12th Edition, and matches. That is a statement about the drawing, not a guarantee — always cut and fold a sample before committing to a die.

What is Two-cell tube with integral partition?

Two-cell tube with integral partition is a carton insert or fitment. An open-ended sleeve divided into two equal cells by a partition folded from the same blank. The partition carries the glue lap, so the tube and the divider are made in one gluing operation.

Uses

Protecting or separating goods inside a larger case
High-volume packing lines, since a pre-glued blank erects in one movement

Advantages

Cut from a single blank, so there is one tool and one part to stock
Arrives glued and flat, and erects quickly by hand or by machine
Cut from offcuts or lighter board than the outer case, so it adds little cost

Disadvantages

The glued joint sets the minimum order — short runs are rarely economical

Typical industries

General packing and light manufacturing

Recommended board grades

Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.

At a glance

Code	`F10.11`
Family	Folding carton (ECMA)
Also known as	F10.11.00.00, divided tube, two cell sleeve
Blank size at this size	434 × 112 mm
Panels	8
Creases	7

Measured against the p.68 plate with scripts/plate-diff.py: score 1.000, MATCH, cut 1.000 found / 1.000 extra, crease 1.000 / 1.000. A tapered glue lap 3.41 wide and seven panels of 18.15 over a body 34.04 tall, and nothing else on the page. WHAT THE PLATE DOES NOT SAY: with all seven panels equal, A and B are the same width here and their ORDER cannot be read off this blank. The order used is taken from F10.13 on the same page, whose flap layout is only symmetric for partition-A, backL-B, endL-A, frontL-B, frontR-B, endR-A, backR-B — see the note at the head of this file. This first measured 0.894 against a reference that still carried its own A and B dimension arrows in the cut channel; the drawing did not change.

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open F10.11 in the generator

Other codes in this group

Browse every code, or read what the groups mean.

Every FEFCO code we build — all 244 of them, grouped.
FEFCO codes explained — what the four digits mean and what each group covers.
How to measure a box — inside, outside and crease-to-crease.
Flutes and calipers — why board thickness changes the blank.