Two-cell carton, a tuck lid over each cell Box Template Generator

Two-cell carton, a tuck lid over each cell. Both cells close separately: each has its own tuck lid, hinged off opposite walls so the two open away from each other, over a folded bottom.

Checked against the plate. This blank has been compared side by side with the drawing in the FEFCO Code, 12th Edition, and matches. That is a statement about the drawing, not a guarantee — always cut and fold a sample before committing to a die.

What is Two-cell carton, a tuck lid over each cell?

Two-cell carton, a tuck lid over each cell is a carton insert or fitment. Both cells close separately: each has its own tuck lid, hinged off opposite walls so the two open away from each other, over a folded bottom.

Uses

Retail and gift packaging, where the box is seen by the customer
Protecting or separating goods inside a larger case

Advantages

Cut from a single blank, so there is one tool and one part to stock
Locks closed without glue or tape, which saves a consumable and a step
Cut from offcuts or lighter board than the outer case, so it adds little cost

Disadvantages

Hand-locking takes longer per box than a taped or glued closure

Typical industries

General packing and light manufacturing

Recommended board grades

Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.

At a glance

Code	`F10.13`
Family	Folding carton (ECMA)
Also known as	F10.13.00.00, divided carton, two tuck cells
Blank size at this size	434 × 245 mm
Panels	22
Creases	22

Measured against the p.68 plate with scripts/plate-diff.py: score 0.984, MATCH, cut 1.000 found / 0.985 extra, crease 1.000 / 0.996. This plate is what fixes the panel order for all three F10.1x codes: a tuck lid on panels 2 and 5, a dust flap either side of each, and panel 7 bare at both ends is only symmetric if panel 1 is the partition and the two lids are the two cells' lids. Top dust flaps are half the lid depth, bottom flaps three quarters of it and tapered 0.2 of it away from the closure panel.

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open F10.13 in the generator

Other codes in this group

Browse every code, or read what the groups mean.

Every FEFCO code we build — all 244 of them, grouped.
FEFCO codes explained — what the four digits mean and what each group covers.
How to measure a box — inside, outside and crease-to-crease.
Flutes and calipers — why board thickness changes the blank.