Glued carton with hanger tab Box Template Generator

Glued carton with hanger tab. A glued tube whose front closure flap carries a hooked hanger tab for a shop rail, with a thumb hole die-cut through the flap beneath it. Length here is the tube height, which is the plate’s un-creased dimension.

Checked against the plate. This blank has been compared side by side with the drawing in the FEFCO Code, 12th Edition, and matches. That is a statement about the drawing, not a guarantee — always cut and fold a sample before committing to a die.

What is Glued carton with hanger tab?

Glued carton with hanger tab is a carton insert or fitment. A glued tube whose front closure flap carries a hooked hanger tab for a shop rail, with a thumb hole die-cut through the flap beneath it. Length here is the tube height, which is the plate’s un-creased dimension.

Uses

Retail and gift packaging, where the box is seen by the customer
High-volume packing lines, since a pre-glued blank erects in one movement

Advantages

Cut from a single blank, so there is one tool and one part to stock
Arrives glued and flat, and erects quickly by hand or by machine

Disadvantages

The glued joint sets the minimum order — short runs are rarely economical

Typical industries

Retail display

Recommended board grades

Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.

At a glance

Code	`F10.81`
Family	Folding carton (ECMA)
Also known as	F10.81.00.00, hanger carton
Blank size at this size	387 × 300 mm
Panels	13
Creases	12

Measured against the p.69 plate with scripts/plate-diff.py: score 0.995, MATCH, cut 1.000 found / 1.000 extra, crease 1.000 / 1.000. The hanger's crown is drawn at its true height: the plate reader flattens a PDF curve to its Bezier control polygon and reports the peak 0.79 too high, so the tab here is drawn from the curve the page prints rather than from the reader's reading of it, and still matches. The two hooks either side of the stem are simplified to straight notches — under 0.8 of the blank's 130, which is inside the comparison's tolerance.

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open F10.81 in the generator

Other codes in this group

Browse every code, or read what the groups mean.

Every FEFCO code we build — all 244 of them, grouped.
FEFCO codes explained — what the four digits mean and what each group covers.
How to measure a box — inside, outside and crease-to-crease.
Flutes and calipers — why board thickness changes the blank.