Round-ended tray with a wrap-over cover Box Template Generator

Round-ended tray with a wrap-over cover. The round-ended tray with a long fourth panel that folds up over the two semicircular ends and glues to the far wall, closing the box as a barrel vault.

Checked against the plate. This blank has been compared side by side with the drawing in the FEFCO Code, 12th Edition, and matches. That is a statement about the drawing, not a guarantee — always cut and fold a sample before committing to a die.

What is Round-ended tray with a wrap-over cover?

Round-ended tray with a wrap-over cover is a carton insert or fitment. The round-ended tray with a long fourth panel that folds up over the two semicircular ends and glues to the far wall, closing the box as a barrel vault.

Uses

Retail and gift packaging, where the box is seen by the customer
High-volume packing lines, since a pre-glued blank erects in one movement

Advantages

Cut from a single blank, so there is one tool and one part to stock
Arrives glued and flat, and erects quickly by hand or by machine

Disadvantages

The glued joint sets the minimum order — short runs are rarely economical

Typical industries

Retail display

Recommended board grades

Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.

At a glance

Code	`F20.36`
Family	Folding carton (ECMA)
Also known as	F20.36.00.00, round end wrap
Blank size at this size	412 × 350 mm
Panels	11
Creases	10

Measured against the p.70 plate with scripts/plate-diff.py: score 0.929, MATCH, cut 1.000 found / 1.000 extra, crease 1.000 found / 0.945 extra. Panel run 15.89, 31.77, 15.88, 63.55 with a 3.17 glue tab, over a body 47.66 tall: H, B, H and then a cover of exactly 2B carrying no flap, which is what identifies it as the wrap. The end wall is H straight then a half circle of radius B/2, drawn 34.86 deep against H + B/2 = 34.86. The plate reader takes a PDF curve's Bezier control polygon as the shape, which sits about 2.75 inside the printed arc; this draws the arc, and that difference is most of what separates 0.929 from 1.000 here — on F20.37, which is the same tray without the cover to dilute it, the same difference is fatal. See the note above that code's builder.

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open F20.36 in the generator

Other codes in this group

Browse every code, or read what the groups mean.

Every FEFCO code we build — all 244 of them, grouped.
FEFCO codes explained — what the four digits mean and what each group covers.
How to measure a box — inside, outside and crease-to-crease.
Flutes and calipers — why board thickness changes the blank.