Tray with semicircular end walls Box Template Generator

Tray with semicircular end walls. A glued tray whose two end walls rise straight to the side-wall height and then close as a half circle, giving a cradle open along its length. The side walls carry a square corner tab at each end.

Checked against the plate. This blank has been compared side by side with the drawing in the FEFCO Code, 12th Edition, and matches. That is a statement about the drawing, not a guarantee — always cut and fold a sample before committing to a die.

What is Tray with semicircular end walls?

Tray with semicircular end walls is a carton insert or fitment. A glued tray whose two end walls rise straight to the side-wall height and then close as a half circle, giving a cradle open along its length. The side walls carry a square corner tab at each end.

Uses

Retail and gift packaging, where the box is seen by the customer
High-volume packing lines, since a pre-glued blank erects in one movement

Advantages

Cut from a single blank, so there is one tool and one part to stock
Arrives glued and flat, and erects quickly by hand or by machine

Disadvantages

The glued joint sets the minimum order — short runs are rarely economical

Typical industries

Retail display

Recommended board grades

Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.

At a glance

Code	`F20.37`
Family	Folding carton (ECMA)
Also known as	F20.37.00.00, round end tray
Blank size at this size	175 × 324 mm
Panels	9
Creases	8

PLACEHOLDER37

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open F20.37 in the generator

Other codes in this group

Browse every code, or read what the groups mean.

Every FEFCO code we build — all 244 of them, grouped.
FEFCO codes explained — what the four digits mean and what each group covers.
How to measure a box — inside, outside and crease-to-crease.
Flutes and calipers — why board thickness changes the blank.