Gusseted tray with hinged lid Box Template Generator

Gusseted tray with hinged lid. Tray and lid cut from one rectangle with nothing wasted: the corners close on 45-degree gussets rather than tabs, and the lid folds over on the same board with a lip that drops down the front.

Checked against the plate. This blank has been compared side by side with the drawing in the FEFCO Code, 12th Edition, and matches. That is a statement about the drawing, not a guarantee — always cut and fold a sample before committing to a die.

What is Gusseted tray with hinged lid?

Gusseted tray with hinged lid is a carton insert or fitment. Tray and lid cut from one rectangle with nothing wasted: the corners close on 45-degree gussets rather than tabs, and the lid folds over on the same board with a lip that drops down the front.

Uses

General packing where a simple, economical board box is wanted

Advantages

Cut from a single blank, so there is one tool and one part to stock

Disadvantages

No standard style suits every product; check the fit against a sample before committing to a tool

Typical industries

General packing and light manufacturing

Recommended board grades

Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.

At a glance

Code	`F20.60`
Family	Folding carton (ECMA)
Also known as	F20.60.00.00, gusseted tray with lid
Blank size at this size	263 × 215 mm
Panels	19
Creases	18

Measured against the p.72 plate with scripts/plate-diff.py: score 1.000, MATCH, cut 1.000 found / 1.000 extra, crease 1.000 / 1.000. A full rectangle 130.48 by 107.18 with nothing cut out of it: body 69.90 tall, panel run 18.64, 37.28, 18.64, 37.28, 18.64 = H, B, H, B, H, and a band H deep above and below cut through at all four panel joints. The only diagonals on the plate are the two 45-degree gussets, one beside the lid and one beside the base, and they are what closes the corners. This scored 0.892 when first measured, on a perfect cut line and a crease line short by one fold; that fold was the closing edge of a closed dashed path, which the plate reader was dropping at the time. Nothing in the template changed.

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open F20.60 in the generator

Other codes in this group

Browse every code, or read what the groups mean.

Every FEFCO code we build — all 244 of them, grouped.
FEFCO codes explained — what the four digits mean and what each group covers.
How to measure a box — inside, outside and crease-to-crease.
Flutes and calipers — why board thickness changes the blank.