Tube with a full-width glue panel and three-flap ends Box Template Generator
Tube with a full-width glue panel and three-flap ends. The three-flap tabbed end of F60.01 on a tube whose manufacturer’s joint is a full side-panel width rather than a narrow lap, so the seam doubles one wall.
Checked against the plate. This blank has been compared side by side with the drawing in the FEFCO Code, 12th Edition, and matches. That is a statement about the drawing, not a guarantee — always cut and fold a sample before committing to a die.
What is Tube with a full-width glue panel and three-flap ends?
Tube with a full-width glue panel and three-flap ends is a carton insert or fitment. The three-flap tabbed end of F60.01 on a tube whose manufacturer’s joint is a full side-panel width rather than a narrow lap, so the seam doubles one wall.
Uses
- Retail and gift packaging, where the box is seen by the customer
- High-volume packing lines, since a pre-glued blank erects in one movement
Advantages
- Cut from a single blank, so there is one tool and one part to stock
- Arrives glued and flat, and erects quickly by hand or by machine
Disadvantages
- The glued joint sets the minimum order — short runs are rarely economical
Typical industries
- General packing and light manufacturing
Recommended board grades
Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.
At a glance
| Code | F60.02 |
| Family | Folding carton (ECMA) |
| Also known as | F60.02.00.00 |
| Blank size at this size | 372 × 239 mm |
| Panels | 13 |
| Creases | 12 |
Measured against the p.77 plate with scripts/plate-diff.py: score 0.994, MATCH, cut 0.994 found / 1.000 extra, crease 1.000 / 1.000. Panel run 35.70, 19.69, 35.70, 19.70 over a body 44.31 tall, B on the 19.69 run and H on the 35.70 run. Same three-flap tabbed end as F60.01; the difference is the joint, a full B-wide glue panel on the left of the front set in 1.23 from each body crease and chamfered at 45 degrees into them, with no lap on the right at all. SHARES ITS FOLD PATTERN with F60.01.
Get the dieline
The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.
Open F60.02 in the generatorOther codes in this group
- RTEReverse Tuck End (RTE)checked
- STEStraight Tuck End (STE)checked
- AUTOAuto-bottom (crash lock) carton
- SLEEVESleeve (open both ends)
- PILLOWPillow box
- TTSBTuck Top, Seal End Bottom
- SNAPSnap-lock bottom (1-2-3 bottom)
- SEALSeal End carton
- GABLEGable top carton
- AUTO-FAuto-bottom, tuck to frontchecked
- SKILLET-TTSkillet base, tuck topchecked
- RTE-INVInverted Reverse Tuck Endchecked
- B4050Four-corner tray with hinged lid
- SNAP-FSnap-lock bottom, tuck to frontchecked
- HEXHexagonal carton
- STE-FSame panel tuck, to frontchecked
- B1010Self-locking traychecked
- TTSB-FTuck Top (front), Seal End Bottom
- AUTO-SEALCrash lock base, sealed top
- B6121Four-corner hinged lid tray, webbed
- WEBTUCKWebbed tuck carton
- TAPERTapered display tray
- B4020In-fold tray, four corners gluedchecked
- WRAPNon-glued wrap
Browse every code, or read what the groups mean.
Related
- Every FEFCO code we build — all 244 of them, grouped.
- FEFCO codes explained — what the four digits mean and what each group covers.
- How to measure a box — inside, outside and crease-to-crease.
- Flutes and calipers — why board thickness changes the blank.