Hinged-lid carton with wing side walls Box Template Generator

Hinged-lid carton with wing side walls. A one-piece carton wrapped the short way: front, base, back, shoulder, lid, lid flange and tuck in one run, closed at each side by a flap off the back and off the shoulder, each carrying a square wing that makes up the rest of the side wall.

Checked against the plate. This blank has been compared side by side with the drawing in the FEFCO Code, 12th Edition, and matches. That is a statement about the drawing, not a guarantee — always cut and fold a sample before committing to a die.

What is Hinged-lid carton with wing side walls?

Hinged-lid carton with wing side walls is a carton insert or fitment. A one-piece carton wrapped the short way: front, base, back, shoulder, lid, lid flange and tuck in one run, closed at each side by a flap off the back and off the shoulder, each carrying a square wing that makes up the rest of the side wall.

Uses

Retail and gift packaging, where the box is seen by the customer

Advantages

Cut from a single blank, so there is one tool and one part to stock
Locks closed without glue or tape, which saves a consumable and a step

Disadvantages

Hand-locking takes longer per box than a taped or glued closure

Typical industries

General packing and light manufacturing

Recommended board grades

Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.

At a glance

Code	`F60.11`
Family	Folding carton (ECMA)
Also known as	F60.11.00.00
Blank size at this size	551 × 241 mm
Panels	19
Creases	18

Measured against the p.78 plate with scripts/plate-diff.py: score 1.000, MATCH, cut 1.000 found / 1.000 extra, crease 1.000 / 1.000, and the fit landed on the drawn proportions exactly. Seven panels 31.38, 14.26, 34.23, 7.13, 14.26, 11.41, 10.70 over a body 28.53 tall; the plate measures A = 28.53 down the body, B = 14.26 across the second panel and H = 41.36 across panels three and four TOGETHER, and every width then falls out as H-0.7B, B, H-B/2, B/2, B, 0.8B, 0.75B. Flaps B deep on panels 1, 3, 4 and 6 only; panels 2 and 5 are covered instead by square B-by-B wings hinged on the flaps beside them. Those wings first scored 0.903 because they were drawn touching the body line, which the engine reads as a shared edge and creases; the plate cuts there, so they are held off by a hair.

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open F60.11 in the generator

Other codes in this group

Browse every code, or read what the groups mean.

Every FEFCO code we build — all 244 of them, grouped.
FEFCO codes explained — what the four digits mean and what each group covers.
How to measure a box — inside, outside and crease-to-crease.
Flutes and calipers — why board thickness changes the blank.