Two-panel folder with tongue and slot Box Template Generator

Two-panel folder with tongue and slot. A folder whose first panel is creased on all four sides and closed by a tapered tongue that passes through a slot pierced in the folded-over leaf.

Checked against the plate. This blank has been compared side by side with the drawing in the FEFCO Code, 12th Edition, and matches. That is a statement about the drawing, not a guarantee — always cut and fold a sample before committing to a die.

What is Two-panel folder with tongue and slot?

Two-panel folder with tongue and slot is a carton insert or fitment. A folder whose first panel is creased on all four sides and closed by a tapered tongue that passes through a slot pierced in the folded-over leaf.

Uses

General packing where a simple, economical board box is wanted

Advantages

Cut from a single blank, so there is one tool and one part to stock

Disadvantages

No standard style suits every product; check the fit against a sample before committing to a tool

Typical industries

General packing and light manufacturing

Recommended board grades

Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.

At a glance

Code	`F60.92`
Family	Folding carton (ECMA)
Also known as	F60.92.00.00
Blank size at this size	501 × 221 mm
Panels	5
Creases	4

Measured against the p.80 plate with scripts/plate-diff.py: score 1.000, MATCH, cut 1.000 found / 1.000 extra, crease 1.000 / 1.000. Panel 52.20 by 41.76 creased on ALL FOUR sides, flaps 0.15A deep chamfered 0.15A at 45 degrees, a tongue 0.5A long tapering 0.3A out and 0.1A down to a 0.1A shoulder and radiused 0.1A at both outer corners, and a stadium slot 0.05A by B/2 pierced in the leaf at 0.75A to 0.80A across it. This read 0.921 until the flaps were written out by hand: taperedRect clamps its taper to half the flap depth, and here the chamfer IS the flap depth, so the drawn chamfer was half the plate's and the silhouette carried the error.

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open F60.92 in the generator

Other codes in this group

Browse every code, or read what the groups mean.

Every FEFCO code we build — all 244 of them, grouped.
FEFCO codes explained — what the four digits mean and what each group covers.
How to measure a box — inside, outside and crease-to-crease.
Flutes and calipers — why board thickness changes the blank.