Rectangular tube with a three-part folded liner Box Template Generator

Rectangular tube with a three-part folded liner. A four-panel tube whose strip runs on into a liner the width of a long wall, itself creased into three so it folds back against the inside of the box rather than lying flat.

Checked against the plate. This blank has been compared side by side with the drawing in the FEFCO Code, 12th Edition, and matches. That is a statement about the drawing, not a guarantee — always cut and fold a sample before committing to a die.

What is Rectangular tube with a three-part folded liner?

Rectangular tube with a three-part folded liner is a carton insert or fitment. A four-panel tube whose strip runs on into a liner the width of a long wall, itself creased into three so it folds back against the inside of the box rather than lying flat.

Uses

Protecting or separating goods inside a larger case

Advantages

Cut from a single blank, so there is one tool and one part to stock
Cut from offcuts or lighter board than the outer case, so it adds little cost

Disadvantages

No standard style suits every product; check the fit against a sample before committing to a tool

Typical industries

General packing and light manufacturing

Recommended board grades

Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.

At a glance

Code	`F80.24`
Family	Folding carton (ECMA)
Also known as	F80.24.00.00, lined tube with folded liner
Blank size at this size	634 × 150 mm
Panels	8
Creases	7

Measured against the p.84 plate with scripts/plate-diff.py: score 1.000, MATCH, cut 1.000 found / 1.000 extra, crease 1.000 / 1.000. Rectangle 203.82 by 48.53 with eight vertical folds, two of them 0.13 apart at 87.22 and 87.35 — board thickness at the plate's own scale, drawn here as one fold because a panel that narrow is a fifth of a raster cell and is not a panel. Run 19.41, 48.53, 19.28, 0.13, 48.53, 19.28, 32.48, 9.71, 6.47, with A = 48.53 and B = 19.28 off the plate's arrows: panels two to six are the tube at 2(A+B), and the 48.66 tail is A again, split 0.669, 0.200, 0.133. H is drawn equal to A; nothing on the page ties them, so they are separate dimensions here and the fit finds them equal on its own.

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open F80.24 in the generator

Other codes in this group

Browse every code, or read what the groups mean.

Every FEFCO code we build — all 244 of them, grouped.
FEFCO codes explained — what the four digits mean and what each group covers.
How to measure a box — inside, outside and crease-to-crease.
Flutes and calipers — why board thickness changes the blank.