Folded card with a bottle silhouette Box Template Generator

Folded card with a bottle silhouette. A card creased down the middle with a bottle-shaped hole die-cut through one half, so the bottle stands through the card and the second half folds back as a support.

Checked against the plate. This blank has been compared side by side with the drawing in the FEFCO Code, 12th Edition, and matches. That is a statement about the drawing, not a guarantee — always cut and fold a sample before committing to a die.

What is Folded card with a bottle silhouette?

Folded card with a bottle silhouette is a carton insert or fitment. A card creased down the middle with a bottle-shaped hole die-cut through one half, so the bottle stands through the card and the second half folds back as a support.

Uses

Retail and gift packaging, where the box is seen by the customer

Advantages

Cut from a single blank, so there is one tool and one part to stock

Disadvantages

No standard style suits every product; check the fit against a sample before committing to a tool

Typical industries

Drinks and bottled goods
Retail display

Recommended board grades

Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.

At a glance

Code	`F80.52`
Family	Folding carton (ECMA)
Also known as	F80.52.00.00, bottle card, silhouette card
Blank size at this size	261 × 196 mm
Panels	2
Creases	1

Measured against the p.85 plate with scripts/plate-diff.py: score 0.967, MATCH, cut 0.967 found / 0.991 extra, crease 1.000 / 1.000. A rectangle 130.48 by 98.45 with one fold dead centre at 65.24; the arrows give A = 98.45 and B = 65.23, so the blank is 2B by A. The bottle profile is 41.51 by 62.87, centred on the right panel both ways, and is read off the plate's own path: flat neck top to 0.126 of the half width on a 0.1426 radius, neck sides at 0.2686, shoulder straight from 0.3206 at 0.2561 of the depth to 0.9480 at 0.5511, body sides at the full half width, and a 0.2857 bottom radius into a base out to 0.7143. The two shoulder fillets are drawn as their chords — each bulges about 0.3 of a unit on a blank 130 wide, a fifth of the comparison's tolerance — and the two end radii, ten times that, are drawn as arcs.

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open F80.52 in the generator

Other codes in this group

Browse every code, or read what the groups mean.

Every FEFCO code we build — all 244 of them, grouped.
FEFCO codes explained — what the four digits mean and what each group covers.
How to measure a box — inside, outside and crease-to-crease.
Flutes and calipers — why board thickness changes the blank.