Euro hang tab, crash lock base Box Template Generator
Euro hang tab, crash lock base. The doubled hang tab over a self-erecting glued base. Squares up in one movement, closes on top with overlapping flaps, and hangs straight on the peg.
Checked against the plate. This blank has been compared side by side with the drawing in the FEFCO Code, 12th Edition, and matches. That is a statement about the drawing, not a guarantee — always cut and fold a sample before committing to a die.
What is Euro hang tab, crash lock base?
Euro hang tab, crash lock base is a folding carton with a glued side seam, closing at each end with a tuck, a lock or a glued flap. The doubled hang tab over a self-erecting glued base. Squares up in one movement, closes on top with overlapping flaps, and hangs straight on the peg.
Uses
- Retail and gift packaging, where the box is seen by the customer
- High-volume packing lines, since a pre-glued blank erects in one movement
Advantages
- Cut from a single blank, so there is one tool and one part to stock
- Arrives glued and flat, and erects quickly by hand or by machine
Disadvantages
- The glued joint sets the minimum order — short runs are rarely economical
Typical industries
- General packing and light manufacturing
Recommended board grades
Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.
At a glance
| Code | HANG-AUTO |
| Family | Folding carton (ECMA) |
| Also known as | A60.15.00.03, extended back panel over crash lock base |
| Blank size at this size | 294 × 340 mm |
| Panels | 15 |
| Creases | 14 |
ECMA 2022 code newly claimed. The p.28 plate puts closure 15 over the third panel from the glue seam on top of the crash-lock base drawn to the same numbers as A60.20.00.03 and A60.01.00.00. 60 for the base, 15 for the top, and 00 for the base panel pair because a crash lock hangs off no single panel.
Get the dieline
The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.
Open HANG-AUTO in the generatorOther codes in this group
- RTEReverse Tuck End (RTE)checked
- STEStraight Tuck End (STE)checked
- AUTOAuto-bottom (crash lock) carton
- SLEEVESleeve (open both ends)
- PILLOWPillow box
- TTSBTuck Top, Seal End Bottom
- SNAPSnap-lock bottom (1-2-3 bottom)
- SEALSeal End carton
- GABLEGable top carton
- AUTO-FAuto-bottom, tuck to frontchecked
- SKILLET-TTSkillet base, tuck topchecked
- RTE-INVInverted Reverse Tuck Endchecked
- B4050Four-corner tray with hinged lid
- SNAP-FSnap-lock bottom, tuck to frontchecked
- HEXHexagonal carton
- STE-FSame panel tuck, to frontchecked
- B1010Self-locking traychecked
- TTSB-FTuck Top (front), Seal End Bottom
- AUTO-SEALCrash lock base, sealed top
- B6121Four-corner hinged lid tray, webbed
- WEBTUCKWebbed tuck carton
- TAPERTapered display tray
- B4020In-fold tray, four corners gluedchecked
- WRAPNon-glued wrap
Browse every code, or read what the groups mean.
Related
- Every FEFCO code we build — all 244 of them, grouped.
- FEFCO codes explained — what the four digits mean and what each group covers.
- How to measure a box — inside, outside and crease-to-crease.
- Flutes and calipers — why board thickness changes the blank.