Euro hang tab, glued base Box Template Generator

Euro hang tab, glued base. A doubled euro hang tab standing above a carton whose base is a full glued band. Fills from the top, closes flat on the line, and hangs on a peg without a separate hanger.

Checked against the plate. This blank has been compared side by side with the drawing in the FEFCO Code, 12th Edition, and matches. That is a statement about the drawing, not a guarantee — always cut and fold a sample before committing to a die.

What is Euro hang tab, glued base?

Euro hang tab, glued base is a folding carton with a glued side seam, closing at each end with a tuck, a lock or a glued flap. A doubled euro hang tab standing above a carton whose base is a full glued band. Fills from the top, closes flat on the line, and hangs on a peg without a separate hanger.

Uses

Retail and gift packaging, where the box is seen by the customer
High-volume packing lines, since a pre-glued blank erects in one movement

Advantages

Cut from a single blank, so there is one tool and one part to stock
Arrives glued and flat, and erects quickly by hand or by machine

Disadvantages

The glued joint sets the minimum order — short runs are rarely economical

Typical industries

General packing and light manufacturing

Recommended board grades

Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.

At a glance

Code	`HANG-SKILLET`
Family	Folding carton (ECMA)
Also known as	A10.15.03.03, extended back panel over full overlap base
Blank size at this size	294 × 357 mm
Panels	15
Creases	14

ECMA 2022 code newly claimed. The p.21 plate closes the base with the plain "10" band, all four flaps the full carton depth, and the top with closure 15 over the third panel from the glue seam: two equal plies of 0.75 of the front panel each, a fold between them, a euro hang hole 1/3 of a ply either side of that fold, and the tab carried on into a tuck tongue 0.417 of a ply long. 10 for the base, 15 for the top, 03 for both panels.

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open HANG-SKILLET in the generator

Other codes in this group

Browse every code, or read what the groups mean.

Every FEFCO code we build — all 244 of them, grouped.
FEFCO codes explained — what the four digits mean and what each group covers.
How to measure a box — inside, outside and crease-to-crease.
Flutes and calipers — why board thickness changes the blank.