Euro hang tab tuck, full crash lock base Box Template Generator

Euro hang tab tuck, full crash lock base. A hang-tab tuck top on a fully doubled crash-lock base — the strongest base the group draws, under a top that opens and recloses.

Checked against the plate. This blank has been compared side by side with the drawing in the FEFCO Code, 12th Edition, and matches. That is a statement about the drawing, not a guarantee — always cut and fold a sample before committing to a die.

What is Euro hang tab tuck, full crash lock base?

Euro hang tab tuck, full crash lock base is a folding carton with a glued side seam, closing at each end with a tuck, a lock or a glued flap. A hang-tab tuck top on a fully doubled crash-lock base — the strongest base the group draws, under a top that opens and recloses.

Uses

Retail and gift packaging, where the box is seen by the customer
High-volume packing lines, since a pre-glued blank erects in one movement

Advantages

Cut from a single blank, so there is one tool and one part to stock
Arrives glued and flat, and erects quickly by hand or by machine

Disadvantages

The glued joint sets the minimum order — short runs are rarely economical

Typical industries

General packing and light manufacturing

Recommended board grades

Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.

At a glance

Code	`HANG-TUCK-FULL`
Family	Folding carton (ECMA)
Also known as	A61.21.01.03, extended back panel tuck, full crash lock base
Blank size at this size	294 × 332 mm
Panels	15
Creases	14

ECMA 2022 code newly claimed. The p.31 plate draws closure 21 over the third panel from the glue seam exactly as A11.21.03.03 does, over the full crash lock base rebuilt for this job from the A61 plates. The whole blank scores 0.917, up from 0.850 when the base was four full-depth panels.

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open HANG-TUCK-FULL in the generator

Other codes in this group

Browse every code, or read what the groups mean.

Every FEFCO code we build — all 244 of them, grouped.
FEFCO codes explained — what the four digits mean and what each group covers.
How to measure a box — inside, outside and crease-to-crease.
Flutes and calipers — why board thickness changes the blank.