Reduced flap skillet, top and base Box Template Generator

Reduced flap skillet, top and base. Reduced glued bands at both ends, each with its one deep flap on a different panel so the two ends close in opposite directions and the blank nests tightly on the sheet.

Checked against the plate. This blank has been compared side by side with the drawing in the FEFCO Code, 12th Edition, and matches. That is a statement about the drawing, not a guarantee — always cut and fold a sample before committing to a die.

What is Reduced flap skillet, top and base?

Reduced flap skillet, top and base is a folding carton with a glued side seam, closing at each end with a tuck, a lock or a glued flap. Reduced glued bands at both ends, each with its one deep flap on a different panel so the two ends close in opposite directions and the blank nests tightly on the sheet.

Uses

High-volume packing lines, since a pre-glued blank erects in one movement

Advantages

Cut from a single blank, so there is one tool and one part to stock
Arrives glued and flat, and erects quickly by hand or by machine

Disadvantages

The glued joint sets the minimum order — short runs are rarely economical

Typical industries

General packing and light manufacturing

Recommended board grades

Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.

At a glance

Code	`REDUCED-2`
Family	Folding carton (ECMA)
Also known as	A11.11.03.01, reduced flap skillet, top and base
Blank size at this size	334 × 361 mm
Panels	13
Creases	12

ECMA 2022 code newly claimed. The p.22 plate draws the reduced "11" band at both ends off DIFFERENT panels — the full-depth flap sits over the third panel from the glue seam at the base and over the first at the top, which is exactly what the trailing 03 and 01 say, and it is the clearest single confirmation in the group that those two digits are the base and top hinge panels in that order. Drawn on a square section (side panel equal to the front) 2.5 of the front panel tall, so it is defaulted at 80x80x200.

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open REDUCED-2 in the generator

Other codes in this group

Browse every code, or read what the groups mean.

Every FEFCO code we build — all 244 of them, grouped.
FEFCO codes explained — what the four digits mean and what each group covers.
How to measure a box — inside, outside and crease-to-crease.
Flutes and calipers — why board thickness changes the blank.