Full overlap skillet, open base Box Template Generator
Full overlap skillet, open base. Glue-sealed flaps at one end, open at the other. The half-carton that pairs with a tray or a second sleeve to make a two-part pack.
Not yet plate-checked. This template folds, closes and exports cleanly, but its blank has not yet been matched against the standard's own drawing in detail. Treat it as a starting point and check it before you spend anything.
What is Full overlap skillet, open base?
Full overlap skillet, open base is a folding carton with a glued side seam, closing at each end with a tuck, a lock or a glued flap. Glue-sealed flaps at one end, open at the other. The half-carton that pairs with a tray or a second sleeve to make a two-part pack.
Uses
- Retail and gift packaging, where the box is seen by the customer
- High-volume packing lines, since a pre-glued blank erects in one movement
Advantages
- Cut from a single blank, so there is one tool and one part to stock
- Arrives glued and flat, and erects quickly by hand or by machine
Disadvantages
- The glued joint sets the minimum order — short runs are rarely economical
Typical industries
- General packing and light manufacturing
Recommended board grades
Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.
At a glance
| Code | SEAL-OPEN |
| Family | Folding carton (ECMA) |
| Also known as | open ended full overlap skillet |
| Blank size at this size | 284 × 205 mm |
| Panels | 9 |
| Creases | 8 |
Get the dieline
The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.
Open SEAL-OPEN in the generatorOther codes in this group
- RTEReverse Tuck End (RTE)
- STEStraight Tuck End (STE)
- AUTOAuto-bottom (crash lock) carton
- SLEEVESleeve (open both ends)
- PILLOWPillow box
- TTSBTuck Top, Seal End Bottom
- SNAPSnap-lock bottom (1-2-3 bottom)
- SEALSeal End carton
- GABLEGable top carton
- AUTO-FAuto-bottom, tuck to front
- RTE-INVInverted Reverse Tuck End
- B4050Four-corner tray with hinged lid
- SNAP-FSnap-lock bottom, tuck to front
- HEXHexagonal carton
- B1010Self-locking tray
- TTSB-FTuck Top (front), Seal End Bottom
- AUTO-SEALCrash lock base, sealed top
- B6121Four-corner hinged lid tray, webbed
- WEBTUCKWebbed tuck carton
- TAPERTapered display tray
- B4020In-fold tray, four corners glued
- WRAPNon-glued wrap
- SNAP-OPENSnap lock base, open top
- PILLOW-SWPillow box with side walls
Browse every code, or read what the groups mean.
Related
- Every FEFCO code we build — all 244 of them, grouped.
- FEFCO codes explained — what the four digits mean and what each group covers.
- How to measure a box — inside, outside and crease-to-crease.
- Flutes and calipers — why board thickness changes the blank.