Reduced flap top, skillet base Box Template Generator

Reduced flap top, skillet base. A full glued band closing the base with a lighter reduced band on top, where one deep flap laps over three short ones. The half-depth flaps use less board and still keep the end square.

Checked against the plate. This blank has been compared side by side with the drawing in the FEFCO Code, 12th Edition, and matches. That is a statement about the drawing, not a guarantee — always cut and fold a sample before committing to a die.

What is Reduced flap top, skillet base?

Reduced flap top, skillet base is a folding carton with a glued side seam, closing at each end with a tuck, a lock or a glued flap. A full glued band closing the base with a lighter reduced band on top, where one deep flap laps over three short ones. The half-depth flaps use less board and still keep the end square.

Uses

High-volume packing lines, since a pre-glued blank erects in one movement

Advantages

Cut from a single blank, so there is one tool and one part to stock
Arrives glued and flat, and erects quickly by hand or by machine

Disadvantages

The glued joint sets the minimum order — short runs are rarely economical

Typical industries

General packing and light manufacturing

Recommended board grades

Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.

At a glance

Code	`SKILLET-RT`
Family	Folding carton (ECMA)
Also known as	A10.11.03.03, reduced flap skillet top, standard skillet base
Blank size at this size	254 × 231 mm
Panels	13
Creases	12

ECMA 2022 code newly claimed. The p.21 plate is the previous style the other way up — the reduced "11" band on top, one flap the full depth over the third panel and the other three at half, over a full "10" band on the base. Drawn at a section half as deep as it is wide, so it is defaulted at 80x40x150.

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open SKILLET-RT in the generator

Other codes in this group

Browse every code, or read what the groups mean.

Every FEFCO code we build — all 244 of them, grouped.
FEFCO codes explained — what the four digits mean and what each group covers.
How to measure a box — inside, outside and crease-to-crease.
Flutes and calipers — why board thickness changes the blank.