Webbed tuck to back Box Template Generator

Webbed tuck to back. A webbed tuck folding from the back panel over a glued base, keeping the front face clear and the corners closed.

Not yet plate-checked. This template folds, closes and exports cleanly, but its blank has not yet been matched against the standard's own drawing in detail. Treat it as a starting point and check it before you spend anything.

What is Webbed tuck to back?

Webbed tuck to back is a folding carton with a glued side seam, closing at each end with a tuck, a lock or a glued flap. A webbed tuck folding from the back panel over a glued base, keeping the front face clear and the corners closed.

Uses

Retail and gift packaging, where the box is seen by the customer
High-volume packing lines, since a pre-glued blank erects in one movement

Advantages

Cut from a single blank, so there is one tool and one part to stock
Arrives glued and flat, and erects quickly by hand or by machine

Disadvantages

The glued joint sets the minimum order — short runs are rarely economical

Typical industries

General packing and light manufacturing

Recommended board grades

Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.

At a glance

Code	`WEBTUCK-B`
Family	Folding carton (ECMA)
Also known as	webbed tuck to back
Blank size at this size	284 × 262 mm
Panels	13
Creases	13

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open WEBTUCK-B in the generator

Other codes in this group

Browse every code, or read what the groups mean.

Every FEFCO code we build — all 244 of them, grouped.
FEFCO codes explained — what the four digits mean and what each group covers.
How to measure a box — inside, outside and crease-to-crease.
Flutes and calipers — why board thickness changes the blank.