FEFCO 0914 Box Template Generator

Liner sleeve with a lapped seam. A five-panel sleeve whose last panel laps over the first at full width instead of butting against it. The overlap does the job a glue tab would, so there is no narrow flap to align.

Checked against the plate. This blank has been compared side by side with the drawing in the FEFCO Code, 12th Edition, and matches. That is a statement about the drawing, not a guarantee — always cut and fold a sample before committing to a die.

What is FEFCO 0914?

FEFCO 0914 is a part that goes inside another box — a partition, pad, liner or corner piece — rather than a container in its own right. A five-panel sleeve whose last panel laps over the first at full width instead of butting against it. The overlap does the job a glue tab would, so there is no narrow flap to align.

Uses

Protecting or separating goods inside a larger case
High-volume packing lines, since a pre-glued blank erects in one movement

Advantages

Cut from a single blank, so there is one tool and one part to stock
Arrives glued and flat, and erects quickly by hand or by machine
Cut from offcuts or lighter board than the outer case, so it adds little cost

Disadvantages

The glued joint sets the minimum order — short runs are rarely economical

Typical industries

General packing and light manufacturing

Recommended board grades

Single wall B or C flute for partitions and pads. Where the fitment carries the load rather than the outer case, match or exceed the outer box’s board.

At a glance

Code	`0914`
Family	Corrugated (FEFCO)
Blank size at this size	855 × 301 mm
Panels	5
Creases	4

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open 0914 in the generator

Other interior fitments

Partitions, dividers, pads, liners and other components used inside another case.

Browse every code, or read what the groups mean.

Every FEFCO code we build — all 244 of them, grouped.
FEFCO codes explained — what the four digits mean and what each group covers.
How to measure a box — inside, outside and crease-to-crease.
Flutes and calipers — why board thickness changes the blank.