FEFCO 0935 Box Template Generator

Interlocking partition set at two heights. An interlocking grid whose transverse strips come in two heights: most sit below the top of the case like an ordinary partition, while the rest run the full depth and stand proud. Both are notched to the same shallow depth, so the tall ones still drop onto the short ones.

Not yet plate-checked. This template folds, closes and exports cleanly, but its blank has not yet been matched against the standard's own drawing in detail. Treat it as a starting point and check it before you spend anything.

What is FEFCO 0935?

FEFCO 0935 is a part that goes inside another box — a partition, pad, liner or corner piece — rather than a container in its own right. An interlocking grid whose transverse strips come in two heights: most sit below the top of the case like an ordinary partition, while the rest run the full depth and stand proud. Both are notched to the same shallow depth, so the tall ones still drop onto the short ones.

Uses

Transit and e-commerce packing, where the box is handled by a carrier
Protecting or separating goods inside a larger case
Jobs where the depth or the fit has to be adjusted after packing

Advantages

Locks closed without glue or tape, which saves a consumable and a step
Cut from offcuts or lighter board than the outer case, so it adds little cost

Disadvantages

Needs 5 separate pieces, so there is more than one tool and more than one part to handle
Hand-locking takes longer per box than a taped or glued closure

Typical industries

General distribution and warehousing

Recommended board grades

Single wall B or C flute for partitions and pads. Where the fitment carries the load rather than the outer case, match or exceed the outer box’s board.

At a glance

Code	`0935`
Family	Corrugated (FEFCO)
Blank size at this size	303 × 721 mm
Panels	5
Creases	0

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open 0935 in the generator

Other interior fitments

Partitions, dividers, pads, liners and other components used inside another case.

Browse every code, or read what the groups mean.

Every FEFCO code we build — all 244 of them, grouped.
FEFCO codes explained — what the four digits mean and what each group covers.
How to measure a box — inside, outside and crease-to-crease.
Flutes and calipers — why board thickness changes the blank.