FEFCO 0929 Box Template Generator

Two U-channel liners. Two creased channels that drop into the case at right angles to each other, one running its length and one its width. Between them the base and all four walls are lined, from two plain strips and no glue.

Checked against the plate. This blank has been compared side by side with the drawing in the FEFCO Code, 12th Edition, and matches. That is a statement about the drawing, not a guarantee — always cut and fold a sample before committing to a die.

What is FEFCO 0929?

FEFCO 0929 is a part that goes inside another box — a partition, pad, liner or corner piece — rather than a container in its own right. Two creased channels that drop into the case at right angles to each other, one running its length and one its width. Between them the base and all four walls are lined, from two plain strips and no glue.

Uses

Transit and e-commerce packing, where the box is handled by a carrier
Protecting or separating goods inside a larger case
Jobs where the depth or the fit has to be adjusted after packing
High-volume packing lines, since a pre-glued blank erects in one movement

Advantages

Arrives glued and flat, and erects quickly by hand or by machine
Cut from offcuts or lighter board than the outer case, so it adds little cost

Disadvantages

Needs 2 separate pieces, so there is more than one tool and more than one part to handle
The glued joint sets the minimum order — short runs are rarely economical

Typical industries

General distribution and warehousing

Recommended board grades

Single wall B or C flute for partitions and pads. Where the fitment carries the load rather than the outer case, match or exceed the outer box’s board.

At a glance

Code	`0929`
Family	Corrugated (FEFCO)
Blank size at this size	703 × 467 mm
Panels	6
Creases	4

No plate badge, and the reason is measured rather than doubted. This blank shares a fold topology with its siblings in its group, and scored against each of their plates through scripts/settle-shared.py it reaches 1.000 on a rival against 1.000 on its own. A fit that solves for proportions cannot tell two same-topology plates apart, so a match here rules other readings OUT rather than ruling this one in — see the docstring in scripts/grant-badges.py. Rival scores: 0949 1.000, 0907 0.500, 0908 0.500, 0910 0.500, 0914 0.500, 0909 0.500, 0938 0.500, 0932 0.244. The drawing itself is not in question; only the claim that it was checked against THIS plate rather than a sibling.

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open 0929 in the generator

Other interior fitments

Partitions, dividers, pads, liners and other components used inside another case.

Browse every code, or read what the groups mean.

Every FEFCO code we build — all 244 of them, grouped.
FEFCO codes explained — what the four digits mean and what each group covers.
How to measure a box — inside, outside and crease-to-crease.
Flutes and calipers — why board thickness changes the blank.