FEFCO 0704 Box Template Generator

Ready-glued case, full-panel bottom, flaps meeting at centre. The full-panel auto bottom of 0701 with flaps sized to meet exactly at the centre on top — half the breadth on the long panels, half the length on the short ones — the same closure as 0712, over the stiffer floor.

Checked against the plate. This blank has been compared side by side with the drawing in the FEFCO Code, 12th Edition, and matches. That is a statement about the drawing, not a guarantee — always cut and fold a sample before committing to a die.

What is FEFCO 0704?

FEFCO 0704 is delivered glued and flat, and erected by pushing them open — the base forms itself or locks with one movement. The full-panel auto bottom of 0701 with flaps sized to meet exactly at the centre on top — half the breadth on the long panels, half the length on the short ones — the same closure as 0712, over the stiffer floor.

Uses

Transit and e-commerce packing, where the box is handled by a carrier
High-volume packing lines, since a pre-glued blank erects in one movement

Advantages

Cut from a single blank, so there is one tool and one part to stock
Arrives glued and flat, and erects quickly by hand or by machine

Disadvantages

The glued joint sets the minimum order — short runs are rarely economical

Typical industries

General distribution and warehousing

Recommended board grades

Single wall B or E flute. The glued joints want a board that takes adhesive well; heavily coated liners can be a problem.

At a glance

Code	`0704`
Family	Corrugated (FEFCO)
Blank size at this size	1062 × 539 mm
Panels	12
Creases	11

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open 0704 in the generator