FEFCO 0708 Box Template Generator

Ready-glued case, half-breadth lock and half-breadth flaps. The shallow four-flap crash lock under four plain half-breadth flaps, like an RSC top. The lightest of the ready-glued cases: nothing laps anywhere, top or bottom. 0711 is the same top over the deeper lock.

Not yet plate-checked. This template folds, closes and exports cleanly, but its blank has not yet been matched against the standard's own drawing in detail. Treat it as a starting point and check it before you spend anything.

What is FEFCO 0708?

FEFCO 0708 is delivered glued and flat, and erected by pushing them open — the base forms itself or locks with one movement. The shallow four-flap crash lock under four plain half-breadth flaps, like an RSC top. The lightest of the ready-glued cases: nothing laps anywhere, top or bottom. 0711 is the same top over the deeper lock.

Uses

Transit and e-commerce packing, where the box is handled by a carrier
High-volume packing lines, since a pre-glued blank erects in one movement

Advantages

Cut from a single blank, so there is one tool and one part to stock
Arrives glued and flat, and erects quickly by hand or by machine

Disadvantages

The glued joint sets the minimum order — short runs are rarely economical

Typical industries

General distribution and warehousing

Recommended board grades

Single wall B or E flute. The glued joints want a board that takes adhesive well; heavily coated liners can be a problem.

At a glance

Code	`0708`
Family	Corrugated (FEFCO)
Blank size at this size	1072 × 367 mm
Panels	14
Creases	13

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open 0708 in the generator