FEFCO 0751 Box Template Generator
Ready-glued ventilated shallow tray. A very shallow glued tray with vents through the base and walls and locking corner tabs. Used for eggs, soft fruit and anything that needs air but no depth.
Not yet plate-checked. This template folds, closes and exports cleanly, but its blank has not yet been matched against the standard's own drawing in detail. Treat it as a starting point and check it before you spend anything.
What is FEFCO 0751?
FEFCO 0751 is delivered glued and flat, and erected by pushing them open — the base forms itself or locks with one movement. A very shallow glued tray with vents through the base and walls and locking corner tabs. Used for eggs, soft fruit and anything that needs air but no depth.
Uses
- High-volume packing lines, since a pre-glued blank erects in one movement
Advantages
- Cut from a single blank, so there is one tool and one part to stock
- Arrives glued and flat, and erects quickly by hand or by machine
Disadvantages
- The glued joint sets the minimum order — short runs are rarely economical
Typical industries
- General packing and light manufacturing
Recommended board grades
Single wall B or E flute. The glued joints want a board that takes adhesive well; heavily coated liners can be a problem.
At a glance
| Code | 0751 |
| Family | Corrugated (FEFCO) |
| Blank size at this size | 415 × 309 mm |
| Panels | 9 |
| Creases | 8 |
Get the dieline
The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.
Open 0751 in the generatorOther ready-glued cases
Delivered glued and shipped flat, ready to use after a simple setting up.
- 0700Ready-glued open tubchecked
- 0701Ready-glued case, full-panel bottom
- 0702Ready-glued open tray, full-panel bottomchecked
- 0703Ready-glued case with full lid
- 0704Ready-glued case, full-panel bottom, flaps meeting at centre
- 0705Ready-glued tray with hinged lid, full-panel bottom
- 0706Ready-glued open tub, half-breadth lockchecked
- 0707Ready-glued case, half-breadth lock with full lid flaps
- 0708Ready-glued case, half-breadth lock and half-breadth flaps
- 0709Ready-glued case, half-breadth lock and meeting flaps
- 0710Ready-glued case, deep lock with full lid flaps
- 0711Ready-glued case, half-breadth flapschecked
- 0712Ready-glued case, flaps meeting at centre
- 0713Ready-glued tray with hinged lid
- 0714Two-piece ready-glued telescopechecked
- 0715Ready-glued case with integral cross partitionchecked
- 0716Shelf-ready display case
- 0717Ready-glued bottle carrier with partitionschecked
- 0718Ready-glued shallow tray, webbed cornerschecked
- 0719Ready-glued tray with hinged lid, half-breadth lock
- 0723Ready-glued square carrier with corner handle
- 0724Ready-glued oblong carrier with partitionschecked
- 0747Ready-glued tray with webbed corners and lid
- 0748Ready-glued tray with tuck-front lid
- 0752Display sleeve with a window face
- 0759Ready-glued double-wall tray with lid
- 0761Ready-glued tray with shallow lid
- 0770Tray with webbed corners, open topchecked
- 0771Ventilated tray, three base ventschecked
- 0772Ventilated tray with returned side walls
- 0773Tray with returned walls, open top
- 0774Ventilated tray with returned walls
Browse every code, or read what the groups mean.
Related
- Every FEFCO code we build — all 244 of them, grouped.
- FEFCO codes explained — what the four digits mean and what each group covers.
- How to measure a box — inside, outside and crease-to-crease.
- Flutes and calipers — why board thickness changes the blank.