FEFCO 0715 Box Template Generator

Ready-glued case with integral cross partition. A crash-lock case whose four base flaps run on past the floor into full-height fins. Squaring the body up stands them into a cross partition, so the box comes off the die with its own four compartments — no separate divider to buy, fit or store.

Checked against the plate. This blank has been compared side by side with the drawing in the FEFCO Code, 12th Edition, and matches. That is a statement about the drawing, not a guarantee — always cut and fold a sample before committing to a die.

What is FEFCO 0715?

FEFCO 0715 is delivered glued and flat, and erected by pushing them open — the base forms itself or locks with one movement. A crash-lock case whose four base flaps run on past the floor into full-height fins. Squaring the body up stands them into a cross partition, so the box comes off the die with its own four compartments — no separate divider to buy, fit or store.

Uses

Transit and e-commerce packing, where the box is handled by a carrier
Protecting or separating goods inside a larger case
High-volume packing lines, since a pre-glued blank erects in one movement

Advantages

Cut from a single blank, so there is one tool and one part to stock
Arrives glued and flat, and erects quickly by hand or by machine
Cut from offcuts or lighter board than the outer case, so it adds little cost

Disadvantages

The glued joint sets the minimum order — short runs are rarely economical

Typical industries

General distribution and warehousing

Recommended board grades

Single wall B or E flute. The glued joints want a board that takes adhesive well; heavily coated liners can be a problem.

At a glance

Code	`0715`
Family	Corrugated (FEFCO)
Blank size at this size	1015 × 709 mm
Panels	18
Creases	21

Get the dieline

The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.

Open 0715 in the generator