FEFCO 0772 Box Template Generator
Ventilated tray with returned side walls. Six vents through the base and a full return beyond each side wall, so the tray stacks loaded. The plate also half-rounds the vents that sit on the wall creases.
Not yet plate-checked. This template folds, closes and exports cleanly, but its blank has not yet been matched against the standard's own drawing in detail. Treat it as a starting point and check it before you spend anything.
What is FEFCO 0772?
FEFCO 0772 is delivered glued and flat, and erected by pushing them open — the base forms itself or locks with one movement. Six vents through the base and a full return beyond each side wall, so the tray stacks loaded. The plate also half-rounds the vents that sit on the wall creases.
Uses
- High-volume packing lines, since a pre-glued blank erects in one movement
Advantages
- Cut from a single blank, so there is one tool and one part to stock
- Arrives glued and flat, and erects quickly by hand or by machine
Disadvantages
- The glued joint sets the minimum order — short runs are rarely economical
Typical industries
- General packing and light manufacturing
Recommended board grades
Single wall B or E flute. The glued joints want a board that takes adhesive well; heavily coated liners can be a problem.
At a glance
| Code | 0772 |
| Family | Corrugated (FEFCO) |
| Blank size at this size | 809 × 509 mm |
| Panels | 11 |
| Creases | 14 |
Get the dieline
The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.
Open 0772 in the generatorOther ready-glued cases
Delivered glued and shipped flat, ready to use after a simple setting up.
- 0700Ready-glued open tubchecked
- 0701Ready-glued case, full-panel bottom
- 0702Ready-glued open tray, full-panel bottomchecked
- 0703Ready-glued case with full lid
- 0704Ready-glued case, full-panel bottom, flaps meeting at centre
- 0705Ready-glued tray with hinged lid, full-panel bottom
- 0706Ready-glued open tub, half-breadth lockchecked
- 0707Ready-glued case, half-breadth lock with full lid flaps
- 0708Ready-glued case, half-breadth lock and half-breadth flaps
- 0709Ready-glued case, half-breadth lock and meeting flaps
- 0710Ready-glued case, deep lock with full lid flaps
- 0711Ready-glued case, half-breadth flapschecked
- 0712Ready-glued case, flaps meeting at centre
- 0713Ready-glued tray with hinged lid
- 0714Two-piece ready-glued telescopechecked
- 0715Ready-glued case with integral cross partitionchecked
- 0716Shelf-ready display case
- 0717Ready-glued bottle carrier with partitionschecked
- 0718Ready-glued shallow tray, webbed cornerschecked
- 0719Ready-glued tray with hinged lid, half-breadth lock
- 0723Ready-glued square carrier with corner handle
- 0724Ready-glued oblong carrier with partitionschecked
- 0747Ready-glued tray with webbed corners and lid
- 0748Ready-glued tray with tuck-front lid
- 0751Ready-glued ventilated shallow tray
- 0752Display sleeve with a window face
- 0759Ready-glued double-wall tray with lid
- 0761Ready-glued tray with shallow lid
- 0770Tray with webbed corners, open topchecked
- 0771Ventilated tray, three base ventschecked
- 0773Tray with returned walls, open top
- 0774Ventilated tray with returned walls
Browse every code, or read what the groups mean.
Related
- Every FEFCO code we build — all 244 of them, grouped.
- FEFCO codes explained — what the four digits mean and what each group covers.
- How to measure a box — inside, outside and crease-to-crease.
- Flutes and calipers — why board thickness changes the blank.