FEFCO 0752 Box Template Generator
Display sleeve with a window face. A five-panel sleeve wrapped into a W by H tube with a full panel lapping the seam, locked by three rounded tabs that drop into slits in the trailing panel. One long face is cut into six hourglass windows on narrow straps, and the free edge behind them is lobed on the same arc, so each window frames its own product.
Not yet plate-checked. This template folds, closes and exports cleanly, but its blank has not yet been matched against the standard's own drawing in detail. Treat it as a starting point and check it before you spend anything.
What is FEFCO 0752?
FEFCO 0752 is delivered glued and flat, and erected by pushing them open — the base forms itself or locks with one movement. A five-panel sleeve wrapped into a W by H tube with a full panel lapping the seam, locked by three rounded tabs that drop into slits in the trailing panel. One long face is cut into six hourglass windows on narrow straps, and the free edge behind them is lobed on the same arc, so each window frames its own product.
Uses
- Retail and gift packaging, where the box is seen by the customer
- Protecting or separating goods inside a larger case
Advantages
- Cut from a single blank, so there is one tool and one part to stock
- Locks closed without glue or tape, which saves a consumable and a step
- Cut from offcuts or lighter board than the outer case, so it adds little cost
Disadvantages
- Hand-locking takes longer per box than a taped or glued closure
Typical industries
- Retail display
Recommended board grades
Single wall B or E flute. The glued joints want a board that takes adhesive well; heavily coated liners can be a problem.
At a glance
| Code | 0752 |
| Family | Corrugated (FEFCO) |
| Blank size at this size | 403 × 373 mm |
| Panels | 8 |
| Creases | 10 |
Get the dieline
The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.
Open 0752 in the generatorOther ready-glued cases
Delivered glued and shipped flat, ready to use after a simple setting up.
- 0700Ready-glued open tubchecked
- 0701Ready-glued case, full-panel bottom
- 0702Ready-glued open tray, full-panel bottomchecked
- 0703Ready-glued case with full lid
- 0704Ready-glued case, full-panel bottom, flaps meeting at centre
- 0705Ready-glued tray with hinged lid, full-panel bottom
- 0706Ready-glued open tub, half-breadth lockchecked
- 0707Ready-glued case, half-breadth lock with full lid flaps
- 0708Ready-glued case, half-breadth lock and half-breadth flaps
- 0709Ready-glued case, half-breadth lock and meeting flaps
- 0710Ready-glued case, deep lock with full lid flaps
- 0711Ready-glued case, half-breadth flapschecked
- 0712Ready-glued case, flaps meeting at centre
- 0713Ready-glued tray with hinged lid
- 0714Two-piece ready-glued telescopechecked
- 0715Ready-glued case with integral cross partitionchecked
- 0716Shelf-ready display case
- 0717Ready-glued bottle carrier with partitionschecked
- 0718Ready-glued shallow tray, webbed cornerschecked
- 0719Ready-glued tray with hinged lid, half-breadth lock
- 0723Ready-glued square carrier with corner handle
- 0724Ready-glued oblong carrier with partitionschecked
- 0747Ready-glued tray with webbed corners and lid
- 0748Ready-glued tray with tuck-front lid
- 0751Ready-glued ventilated shallow tray
- 0759Ready-glued double-wall tray with lid
- 0761Ready-glued tray with shallow lid
- 0770Tray with webbed corners, open topchecked
- 0771Ventilated tray, three base ventschecked
- 0772Ventilated tray with returned side walls
- 0773Tray with returned walls, open top
- 0774Ventilated tray with returned walls
Browse every code, or read what the groups mean.
Related
- Every FEFCO code we build — all 244 of them, grouped.
- FEFCO codes explained — what the four digits mean and what each group covers.
- How to measure a box — inside, outside and crease-to-crease.
- Flutes and calipers — why board thickness changes the blank.