FEFCO 0748 Box Template Generator
Ready-glued tray with tuck-front lid. A glued webbed-corner tray whose lid folds over and tucks down the front. Arrives flat, snaps open and closes without tape — the ready-glued answer to a mailer.
Checked against the plate. This blank has been compared side by side with the drawing in the FEFCO Code, 12th Edition, and matches. That is a statement about the drawing, not a guarantee — always cut and fold a sample before committing to a die.
What is FEFCO 0748?
FEFCO 0748 is delivered glued and flat, and erected by pushing them open — the base forms itself or locks with one movement. A glued webbed-corner tray whose lid folds over and tucks down the front. Arrives flat, snaps open and closes without tape — the ready-glued answer to a mailer.
Uses
- High-volume packing lines, since a pre-glued blank erects in one movement
Advantages
- Cut from a single blank, so there is one tool and one part to stock
- Arrives glued and flat, and erects quickly by hand or by machine
Disadvantages
- The glued joint sets the minimum order — short runs are rarely economical
Typical industries
- General packing and light manufacturing
Recommended board grades
Single wall B or E flute. The glued joints want a board that takes adhesive well; heavily coated liners can be a problem.
At a glance
| Code | 0748 |
| Family | Corrugated (FEFCO) |
| Blank size at this size | 683 × 554 mm |
| Panels | 13 |
| Creases | 12 |
Get the dieline
The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.
Open 0748 in the generatorOther ready-glued cases
Delivered glued and shipped flat, ready to use after a simple setting up.
- 0700Ready-glued open tubchecked
- 0701Ready-glued case, full-panel bottomchecked
- 0702Ready-glued open tray, full-panel bottomchecked
- 0703Ready-glued case with full lidchecked
- 0704Ready-glued case, full-panel bottom, flaps meeting at centrechecked
- 0705Ready-glued tray with hinged lid, full-panel bottomchecked
- 0706Ready-glued open tub, half-breadth lockchecked
- 0707Ready-glued case, half-breadth lock with full lid flapschecked
- 0708Ready-glued case, half-breadth lock and half-breadth flapschecked
- 0709Ready-glued case, half-breadth lock and meeting flaps
- 0710Ready-glued case, deep lock with full lid flapschecked
- 0711Ready-glued case, half-breadth flapschecked
- 0712Ready-glued case, flaps meeting at centrechecked
- 0713Ready-glued tray with hinged lidchecked
- 0714Two-piece ready-glued telescopechecked
- 0715Ready-glued case with integral cross partitionchecked
- 0716Shelf-ready display case with partitionschecked
- 0717Ready-glued bottle carrier with partitionschecked
- 0718Ready-glued shallow tray, webbed cornerschecked
- 0719Ready-glued tray with hinged lid, half-breadth lockchecked
- 0723Ready-glued square carrier with corner handlechecked
- 0724Ready-glued oblong carrier with partitionschecked
- 0747Ready-glued tray with webbed corners and lidchecked
- 0751Ready-glued ventilated tray with perforated topchecked
- 0752Display sleeve with a window facechecked
- 0759Ready-glued double-wall tray with lidchecked
- 0761Ready-glued tray with shallow lidchecked
- 0770Tray with webbed corners, open topchecked
- 0771Ventilated tray, three base ventschecked
- 0772Ventilated tray with returned side wallschecked
- 0773Tray with returned walls, open topchecked
- 0774Ventilated tray with returned wallschecked
Browse every code, or read what the groups mean.
Related
- Every FEFCO code we build — all 244 of them, grouped.
- FEFCO codes explained — what the four digits mean and what each group covers.
- How to measure a box — inside, outside and crease-to-crease.
- Flutes and calipers — why board thickness changes the blank.