Tray liner with double walls Box Template Generator
Tray liner with double walls. A drop-in tray liner whose walls fold back on themselves, so the insert is two boards thick all round. Protects the contents and stiffens the outer case at the same time.
Not yet plate-checked. This template folds, closes and exports cleanly, but its blank has not yet been matched against the standard's own drawing in detail. Treat it as a starting point and check it before you spend anything.
What is Tray liner with double walls?
Tray liner with double walls is a folding carton with a glued side seam, closing at each end with a tuck, a lock or a glued flap. A drop-in tray liner whose walls fold back on themselves, so the insert is two boards thick all round. Protects the contents and stiffens the outer case at the same time.
Uses
- Transit and e-commerce packing, where the box is handled by a carrier
- Protecting or separating goods inside a larger case
Advantages
- Cut from a single blank, so there is one tool and one part to stock
- Cut from offcuts or lighter board than the outer case, so it adds little cost
Disadvantages
- No standard style suits every product; check the fit against a sample before committing to a tool
Typical industries
- General distribution and warehousing
Recommended board grades
Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.
At a glance
| Code | LINER-DW |
| Family | Corrugated (FEFCO) |
| Also known as | double wall tray liner |
| Blank size at this size | 485 × 566 mm |
| Panels | 7 |
| Creases | 6 |
Get the dieline
The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.
Open LINER-DW in the generatorOther codes in this group
- 0201Regular Slotted Container (RSC)checked
- 0427Roll End Tuck Top mailer (RETT)checked
- BOOKWRAPBook wrap / multi-depth mailer
- 0713Ready-glued tray with hinged lid
- RETFRoll End Tuck Front mailer
- 0200Half Slotted Container (HSC)checked
- 0933Interlocking partition set
- 0422One-piece tray with base-locking double walls
- 0402One-piece folder, flaps all roundchecked
- 0300Full telescope box (lid and tray)
- 0716Shelf-ready display case
- 0934Interlocking partition set, many cells
- 0711Ready-glued case, half-breadth flapschecked
- 0887E-commerce wrap with peel-and-seal strip
- 0203Full Overlap Slotted Container (FOL)checked
- 0217Self-locking carry box with handle
- 0202Overlap Slotted Container (OSC)checked
- 0774Ventilated tray with returned walls
- 0301Partial telescope box
- 0712Ready-glued case, flaps meeting at centre
- 0421One-piece tray with corner locks and hinged lidchecked
- 0432Tray with returned walls and corner slots
- 0434Tray with webbed corners and half-width returnschecked
- 0460Shelf display bin
Browse every code, or read what the groups mean.
Related
- Every FEFCO code we build — all 244 of them, grouped.
- FEFCO codes explained — what the four digits mean and what each group covers.
- How to measure a box — inside, outside and crease-to-crease.
- Flutes and calipers — why board thickness changes the blank.