One-piece glued tray Box Template Generator
One-piece glued tray. The same open tray, but the corner tabs are glued rather than locked. Stronger and quicker to erect on an automatic line, at the cost of needing glue.
Not yet plate-checked. This template folds, closes and exports cleanly, but its blank has not yet been matched against the standard's own drawing in detail. Treat it as a starting point and check it before you spend anything.
What is One-piece glued tray?
One-piece glued tray is a folding carton with a glued side seam, closing at each end with a tuck, a lock or a glued flap. The same open tray, but the corner tabs are glued rather than locked. Stronger and quicker to erect on an automatic line, at the cost of needing glue.
Uses
- Retail and gift packaging, where the box is seen by the customer
- High-volume packing lines, since a pre-glued blank erects in one movement
Advantages
- Cut from a single blank, so there is one tool and one part to stock
- Arrives glued and flat, and erects quickly by hand or by machine
Disadvantages
- The glued joint sets the minimum order — short runs are rarely economical
Typical industries
- Retail display
Recommended board grades
Folding boxboard or solid bleached board, typically 250–450 microns. Heavier board for larger cartons, lighter where the carton is filled by machine.
At a glance
| Code | TRAY-GLUE |
| Family | Corrugated (FEFCO) |
| Also known as | glued corner tray |
| Blank size at this size | 469 × 369 mm |
| Panels | 9 |
| Creases | 8 |
Get the dieline
The generator draws this style to whatever dimensions you enter and exports it as a 1:1 PDF, an SVG, or a DXF with the cut, crease and perforation lines on separate layers. Nothing to sign up for.
Open TRAY-GLUE in the generatorOther codes in this group
- 0201Regular Slotted Container (RSC)checked
- 0427Roll End Tuck Top mailer (RETT)checked
- BOOKWRAPBook wrap / multi-depth mailer
- 0713Ready-glued tray with hinged lid
- RETFRoll End Tuck Front mailer
- 0200Half Slotted Container (HSC)checked
- 0933Interlocking partition set
- 0422One-piece tray with base-locking double walls
- 0402One-piece folder, flaps all roundchecked
- 0300Full telescope box (lid and tray)
- 0716Shelf-ready display case
- 0934Interlocking partition set, many cells
- 0711Ready-glued case, half-breadth flapschecked
- 0887E-commerce wrap with peel-and-seal strip
- 0203Full Overlap Slotted Container (FOL)checked
- 0217Self-locking carry box with handle
- 0202Overlap Slotted Container (OSC)checked
- 0774Ventilated tray with returned walls
- 0301Partial telescope box
- 0712Ready-glued case, flaps meeting at centre
- 0421One-piece tray with corner locks and hinged lidchecked
- 0432Tray with returned walls and corner slots
- 0434Tray with webbed corners and half-width returnschecked
- 0460Shelf display bin
Browse every code, or read what the groups mean.
Related
- Every FEFCO code we build — all 244 of them, grouped.
- FEFCO codes explained — what the four digits mean and what each group covers.
- How to measure a box — inside, outside and crease-to-crease.
- Flutes and calipers — why board thickness changes the blank.